分析与生物分析技术杂志

抽象的

Analysis of Physical and Chemical Parameters in Ground Water Used for Drinking around Konso Area, Southwestern Ethiopia

Behailu TW, Badessa TS and Tewodros BA

To improve water quality, there should be a mechanism of keeping safe water source from chemical contaminants in an effective and protective way through the application of regular check up and with interventions by taking exact measure periodically before it is supplied for usage. The intention of this research work is to determine the level of common cations, anions, heavy metals and physical parameters in drinking water supply system in konso and its surrounding area, Southwestern of Ethiopia. Water samples were collected from 23 different locations in the area where there is hand pump or motorized supply system that are used for drinking purpose. Collected samples were analyzed for physicochemical parameters including total alkalinity, Temperature, pH, Electrical Conductivity, Total dissolved solids, Turbidity, Alkalinity, Total hardness and Total suspended solid. Common cations (Li+, K+, Na+,Ca2+ and Mg2+), Common anions (NO3−, SO42−, PO42−, F− and Cl−) and Heavy metals (Pd, Ni, Mn, Pb, Co, Zn, Cu) were analyzed. The obtained results were compared with some national and international standards or guidelines for drinking water. Accordingly, the results obtained show that most of the physical and some common ions and heavy metals were within the accepted range of the guideline recommended by WHO. In addition to this, some parameters are at alarming state as compared to the WHO standards for drinking purposes, thereby suggesting the need for treatment and precautionary measures for use of the particular ground water.